elweegie Posted April 18, 2015 Share Posted April 18, 2015 Hey guys, I have a P570WM with dual 880M 8GB cards in SLI, laptop flashed with Prema Bios from here and the GPUS with SVL7's Bioses....Today for the first time I hooked it up to my desktop screens.... One asus VG278H 120HZ 3d vision screen and a Dell WFP3007.A few issues... The asus detects fine and runs at 60HZ, if I force 120 the monitor complains about the cable (same cable as I have used with it in 120HZ on my desktop) and resets to 60HZ... so no 3d vision.On the Dell, its a 2560x1600 panel but even with the monitor driver installed it wont run at more than 1280x800. >.<Is it something with my cards or the DVI out?Do i need to mod an INF in the video driver?Disappointed as I want to do away with the desktop, I waste so much time copying stuff to it from the laptop when I return from trips. Quote Link to comment Share on other sites More sharing options...
elweegie Posted April 24, 2015 Author Share Posted April 24, 2015 Update..... my reseller contacted me today (pcspecialist.co.uk), they say all the outputs are controlled by the crappy intel on board graphics chip and basically even with two 880M GTX because of the onboard controlling outputs, 1080p 60HZ is the maximum. Quote Link to comment Share on other sites More sharing options...
elweegie Posted April 27, 2015 Author Share Posted April 27, 2015 In case anyone is interested or has the same issue.... They got back to me apologising for talking rubbish, there is no onboard.... which is what I said to them. Apparently a driver issue. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.